Eight Simple Guidelines for Making a Special Candleholder From Vinyl Records

By using a bit of resourcefulness, you may quickly find use for old floppy disk storage as well as vinyl records. Regarding vinyl records, you can build them into quirky, one-of-a kind candleholders. Vinyl record candle holders will definitely be a record piece in every room and can highlight tables, racks as well as desks. This specific job is fairly easy to create and needs only a few simple materials which may be easily obtainable at home. Allow me to share the techniques you could follow to make vinyl record candleholders:

Prepare the materials for the job

To develop distinctive candleholders out of vinyl records, you may, of course, need old vinyl records. These can be bought at traditional retailers or even on-line. A cheaper alternative will be to look in your basement or attic and find out if you can find any utilised records. Some other components you must have are candle lights, an apple, 5 wine corks about similar size as the candle lights, an oven and a baking sheet.

Pre-heat the oven and set up the corks on the baking sheet

The oven must be pre-heated to two hundred degrees Farenheit. Place the corks in a round formation on the baking sheet. Ensure that each one of the 5 corks are similar range from one another.

Put the record over the corks

After setting the corks, position the vinyl record on top of it. Leave about 1 inch allowance in between the side of the record and the corks. The corks could be utilised as the mold that the record could melt on, forming indentations where candle lights could later be put.

Put the baking sheet into the oven

Put the baking sheet to the oven with care so that the record and cork won't move. Bake for around five minutes or if you see that the record has successfully melted on the corks.

Place an apple to the centre section of the record

After baking, take the sheet from the oven. Put the apple on the center of the record. The corks may move a little as the apple weighs down the center of the record. Carefully repair the positions of the corks and put the baking sheet into the oven again for one more three to five minutes.

Take off the baking sheet and shape the record when it is chilled

Remove the baking sheet once more and allow the record to cool down for approximately 15 seconds or till it is not too hot to be handled. You may observe that it is very flexible. Mold the edges of the record to your ideal structure and press it against the cork to fasten it. Hold on another one minute for the record to totally cool.

Eliminate the apple and reshape the record if you want

Now you can remove the apple and turn the vinyl record over. If you're not yet happy with the form, you may place the record to the oven once again and mold it to your desired form.

Stick the candle lights to the candleholder

Drip some hot wax into the candleholder indentations to give assistance to the candle lights you may now insert.

You now have a vinyl record candleholder that you can use as whimsical décor for your home or give away as a unique homemade gift.


------

Written by Patricia Strasser. If you're looking for floppy disk storage for similar craft projects, go and visit http://www.everydayplastics.com/FloppyDiskHolders.php