7 Basic Steps to Develop a Pen Holder Through Old Floppy Disks

Outdated floppy discs may be a trouble to dispose of. The good thing is, there are plenty of recycling tasks that make use of your classic floppy disks and one of them will be to make floppy disk holders for your pencils. This particular project is relatively easy to build and is also suitable for those who really like personal computers as well as recycling. The pen case can even enable you to organise your pencils. Keep in mind these simple steps to generate your personal pen case using old floppy disks:

Get the components and also equipment required

Be sure you obtain the following equipment and components essential for the project: five floppy disks which are three ½ by 5 inches in measurement, 16 zip ties, a portion of old scrap wood, a drill that has a size 5/32 drill bit, as well as a couple of scissors.

Drill holes into four floppy disks

Choose 4 floppy discs and drill 4 slots into each and every disc. Ensure that you put the old piece of wood on your worktop or table to make sure you will not destroy it in the drilling activity. The leading two holes should be on the upper part of the disks on each side of the metal sliders about 1 inch beneath the dent. The lower part slots should be drilled on the edges about a half-inch from the lower part of the disc.

Punch two slots on the remaining floppy disc

Regarding the fifth and last floppy disc, drill slots on each of the side of the disc. This specific disc will function as the base of the pen holder. Don't do anything to this floppy disc till it's the moment to affix the bottom.

Align the first 4 discs in a row

Get the 4 disks you formerly drilled and align them alongside to shape a row. The steel sliders must be placed at the top for all 4 discs.

Attach the disks employing the zip ties

You'll now have to slip the zip ties to the holes and attach the 4 discs together. This stage will trigger a straight line composed of the 4 disks. Be sure you pull the zip ties firmly so that they will be kept together safely and securely.

Make a box simply by folding the ends

Now you may shape a box by simply folding the edges around. The last two ends need to be linked together utilizing zip ties. Pull securely to keep them in place.

Affix the bottom

Once you've developed a box, turn it upside down. The side with the steel sliders will now be on the table. The fifth floppy disk is now able to connected. Put it at the base of the box and then attach it to the sides utilizing the zip ties stowed via the openings. Use the scissors to chop off the sides of the zip ties.

In addition to finding uses for old items that you would otherwise discard, recycling projects can be your own way of preserving the environment.


------

Written by Patricia Strasser. You can find floppy disk holders at http://www.everydayplastics.com/FloppyDiskHolders.php