7 Basic Instructions to Make Your Own Safe Futon Bunk Bed

To begin with, you have to get 2 futon bed sets of identical size. Figure out the actual measurements of each part of the futon mattress to ensure they are of identical dimensions and also to get the dimensions you'll need in order to construct the frames for your futon bunk bed .

Ready the boards to be used for your bunk bed body

To be able to attach your futon mattresses and form them into a bunk bed, you will need to prepare the boards and try cutting it based on the measurements of the 2 futon beds to be utilized as the frame. The frame should ideally consist of headboards, foot panels, and also posts. You need to also have extra boards for the ladder to be affixed soon after.

Make the bunk bed frame

Immediately after cutting your wood, you can set up the bunkbed casing by just drilling appropriate holes in your posts to install your headboards, foot planks, as well as sideboards. Assemble the parts of the bunk bed body using bolts, nuts, and also washers and ensure they are firmly secured.

Attach the futon casing to the bunk bed frame

As soon as your bunk bed frame is ready, you can install your futons frames to it. Drill holes in the head as well as foot decks big enough to contain the mounting bolts that come with the futon casings. You may also use a brand new set of bolts, washers, and nuts which will fit in the holes of your bunk bed structure posts. Immediately after affixing both frames together, tighten up the mounting bolts to make sure your futon bunk bed is certainly strongly hooked up.

Put a ladder to your bunk bed

Build a ladder that will enable you to get to the top bunk. Essentially, the ladder must really be connected near the base of the top bunkbed's sideboard right down to the sideboard towards the bottom bunk. The ladder can also be positioned near the foot deck of your upper bunk down to the foot board of your lower futon bed if you like. The ladder needs to be installed using either stainless steel brackets or just by nailing both ends of the ladder to the side or foot panels of the futon bunk bed.

Put on a finish to your newly made futon bunkbed

Once you've securely fastened the ladder, and also the futons to the body, even out the bunk bed decks with sand paper. Apply paint primer to the surface and allow it to dry. Complete your bunkbed frame with fresh paint, varnish, stain, as well as sealer and leave it to dry.

Assess your bunk bed prior to actual use

Remember to test your new bunk bed first prior to actual use, particularly when created for use by kids. Look out for wobbles which may need the tightening of mounting bolts, and other possible defects that may cause your bunk bed to give at anytime.

After following these easy steps, you will be ready to enjoy a futon bunk bed that is safe, fun, and convenient for you and your family.


------

Written by Patricia Strasser. For futon bunk bed concepts as well as
features, you can take a look at
http://www.bunkbedsnow.com/futon-bunk-bed.html